Specs
- UPC 193308219912
- Onboard Intelligence RED Technology
- Starter Electric
- Steering Control Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
- Caster Forks .50" thick caster yoke arms.
- Front Caster Tires 15 x 6.0-6, smooth-tread, semi-pneumatic.
- Drive Tires 26x12-12, 6ply
- Parking Brake Spring applied, hydraulic release internal wet disc brake.
- Tractor Frame Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
- Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft, double row bearings, top and bottom, and splined blade driver.
- Electrical 12-volt battery with 175-amp alternator.
- Standard Features 12-volt plug-in, engine hour meter and cup holder
- Seat Deluxe, two-tone, bolstered 4" travel suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
- Engine Brand Yanmar
- Engine Brand YANMAR
- Transmission Speeds Infinitely Variable
- Engine Model 3TNV86CT
- Engine Displacement 1568 cc
- Engine Series TNV
- Fuel System Common Rail Diesel with fuel cooler
- Speed Infinitely variable speed selection from 0–10 mph (16 kmph) in low speed forward, 0-6mph (10 kmph) reverse and 0-17 mph (27 kmph) in high speed forward, 0–10 mph (16 kmph) reverse.
- Transmission Hydrostatic
- Drive Hydro-Drive
- Engine Spec DTR2
- Engine Speed 3,000 RPM
- Air Filter Heavy-duty canister air filtration system with electronic vacuum sensor
- Fuel Capacity 12-gallon (45.4-L), side fuel tanks
- Drive Description Kanzaki KPS-18T Transmission, 14-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 1.83/1.09 cubic inch 2 speed Danfoss axial piston motors plus Omni planetary gear reduction, hydraulic oil cooler.
- Fuel Type Diesel
- PTO Engagement Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
- Drive Wheel Release Allows unit movement without engine running.
- Fuel Indicator Yes - mechanical float type
- Deck Lift Hydraulic
- Carb Compliant Yes
- Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- ROPS 2-post foldable ROPS standard with seat belt and latch.
- Deck Style Floating Deck
- Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with finish cut baffles included.
- Width / Cutting Deck 144"
- Deck Construction 7-gauge high strength alloy top that is formed and seam welded, with 7-gauge high strength alloy side skirt.
- Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments.
- Blade Tip Speed Approximately 18,500 fpm
- Blades 6 Blades at 24.50" Length
- Width 144.9 in. (368cm), 84 in. (213cm) @ 3 in. HOC when folded
- Height 72.6 in. (184.3 cm)
- Length 101.3 in. (257.3 cm)
- Curb Weight 3250
Sun Shade
Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)
Buy NowJack
Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).
Jack Mount Receiver
RECEIVER-JACK MOUNT - Lazer Diesel
Buy NowSlow Moving Vehicle Sign
Slow moving sign kit (NLZD)
Buy NowFlasher Light
LIGHT KIT
Buy NowLight Kit, LED (not compatible with 135-2473)
LIGHT KIT
Finish Cut Baffle
Finish cut baffles (144)
Buy Now